PTZ Speed Dome Camera Day & Night

Product Information

Description

The PT TP 4000 is an industrial quality PTZ camera is perfect for high security loss prevention operations. The advanced Day & Night Sony Super HAD chipset produces a beautiful video on your screen at a high resolution of 480 lines. It also features Day and Night function which shows great detail video even at low light environment such as parking lots. Pelco control protocols are fully integrated which means it is completely compatible with any DVR systems that support Pelco D protocol. Using with PTC TP 3000 joystick controller, it can be controlled independently from the DVR. PT TP 4000 is one of the perfect outdoor PTZ solution because of following reasons. Sturdy weatherproof metal housing protects camera from harsh weather condition. And inside of the case there is a heater and blower to prevent fogging up on front protective cover. Also supports 64 presets so you can move to a spot quickly with only a push of button from the joystick controller. The mount for PT TP 4000 is available with a choice of either ceiling or wall mount. The camera operates on AC 24V.


Features

• Zoom Magnification : x22 Optical Zoom, x10 Digital Zoom(combine x220 Zoom)
• Day & Night Function

Powerful Pan/Tilt Functions

• Max. 300˚/sec high speed Pan/tilt Motion
• Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest path. As a result, time to target view is reduced dramatically and the video on the monitor is very natural to watch.
• For jog operation using a controller, since ultra slow speed 0.1˚/sec can be reached, it is very easy to locate camera to desired target view.

Preset, Swing and Group Functions

• Max. 64 sets of position and zoom magnification are designated and stored as Preset. For each Preset, additional information such as Dwell time (pause time in Group action when camera reaches to a certain Preset position), Alarm action and area Label can be assigned independently to meet to your requirements.
• 8 of Swing action can be stored. This enables to move camera repetitively between two preset positions with designated speed.
• 8 set of Group action can be stored. This enables to move camera repetitively with combination of Preset or Swing. A group is composed of max. 20 entities of Preset or Swings.

PTZ Control

• With RS-485 communication, max. 99 of cameras can be controlled at the same time
• Pelco-D or Pelco-P protocol can be selected as a control protocol in the current version of firmware.

OSD (On Screen Display) Menu

• OSD menu is provided to display the status of camera and to configure the functions interactively.
• The information such as Camera ID, Pan/Tilt angle, Alarm I/O, Preset info can be displayed on the screen.

Alarm I/O Functions

• If optional Alarm I/O module is used to this camera. Max. 8 external sensor inputs and 4 relay output can be utilized to give more intelligence.
• If an external sensor is activated, camera can be set to move to the corresponding Preset position. Meanwhile, the output relay can be matched to some specific Preset positions to do counteractions such as turning on the light or sound the alarm.

Easy installation and Operation

• This model is structured to meet outdoor environment. To this end, Fan and Heater are built in the housing and weatherproof environmental structure is designed to meet international standard IP66.
• Camera housing and brackets are designed to install with minimum efforts.

Specifications

• Tell a Friend